High thickness anti-rust (40.0020)

PRODUCT DESCRIPTION: ACRILIC HIGH THICKNESS SPRAY - ANTI-RUST

CODE: 40.0020

PROPERTIES AND AREA OF USE: High thickness acrylic enamel, suitable for the needs of having a high degree of protection and coverage. High dry residue, high viscosity - does not drip. The resulting thickness is 30% higher than that normally provided by commercial acrylic paints. For indoor and outdoor use. Quick drying. Weatherproof and light resistant. Not yellowing. Over-paintable. The dry film of paint has excellent resistance to stress, including atmospheric stress, and is therefore recommended for the protection of iron products located outside. It can be applied directly to rust. High adhesion on many supports such as metal (iron, brass, aluminum), ABS plastics (no PP), wood, glass. The 400 ml aerosol can covers an area of 1,5 - 2 m² depending on the color of the surface, the thickness of each layer and number of layers applied.

USE: Use between +10' C and +25' C, max. air humidity 60%. The surface to be painted must have the same temperatures, to avoid adhesion and finishing problems. For an optimal effect spray from 20-25 cm away. During use, use appropriate personal protective equipment (gloves, goggles and masks). Clean the surface from grease and dust. Remove any rust from metals. In case of use on plastic use previously the plastic primer. For higher adherence to aluminum, use the metal adhesion promoter beforehand. Use the primer-filler base beforehand to level the surfaces. Mask the parts not to be treated. Shake vigorously the can for 2 minutes. Make a spray test on a separate surface. Apply in thin layers with several crossed coats, with an interval of 3-5 minutes between one and the other. Do not apply on synthetic paints. Store in a dry place. Protect from direct sunlight and other heat sources. Use only during the dry season, in places protected from the wind, and in well-ventilated environments. Follow the warning texts on the labels.

TECH DATA:
Tinplate spraycan 15 bars
Net content 400 ml
Appearance Spray can with liquid under pressure
Color Different colors
Odour solvent
Density at 20°C 0,75 ÷ 0,80 g/ml
Pressure at 20°C 4,0 ± 0,5 bar
Pressure at 50°C 8,0 ± 0,5 bar
Flash point < 0° C
Viscosity Ford cup 4 12’’
Dry residues in the can from 17 ± 2%
Gloss level on request matt, satin, glossy
Thickness 2 layers 25 Micron
Thickness 4 layers 60 Micron
Heat resistance 100-120°C
Drying time:
Dust free 10 minutes
Touch dry 20 minutes
Deep dry 24 hours
Patented safety cap "child-proof" with reference to the color in the can