Contact cleaner (80.0062)


CODE: 80.0062

PROPERTIES AND AREA OF USE: Essential to reactivate and lubricate electrical circuits and various mechanisms. Ideal for the car, home, work, the bike, leisure. It guarantees instant effectiveness in restoring electrical conductivity, expelling moisture in wet circuits and unlocking mechanisms affected by oxidation, rust, etc. It does not harm rubber and plastic.

USE: Use between +10' C and +25' C. Use appropriate personal protection (gloves, glasses and masks). Make sure the circuits are turned off and disconnected from the mains. Clean the surface from impurities and dust. Remove any rust from the metals. Mask the parts not to be treated. Shake the cylinder vigorously for 2 minutes. Make a spray test on a separate surface. Spray with short and repeated jets to achieve the desired effect. Apply small amounts at a time until you get the desired effect. To unlock effectively and with less effort, let the product penetrate and wait a few minutes. Maximum efficiency is achieved after evaporation of the solvent. Store in a dry place. Protect from direct sunlight and other heat sources. Use only during the dry season, in places protected from the wind, and in well-ventilated environments. Follow the warning texts on the labels.

Net content 400 ml
Appearance Spray can with liquid under pressure
Color Colorless
Odour solvent
Density at 20°C 0,63 ÷ 0,70 g/ml
Pressure at 20°C 4,0 ± 0,5 bar
Pressure at 50°C 8,0 ± 0,5 bar
Flash point < 0° C