Antique gold Leafing effect (70.0000)

CODE: 70.0000
PROPERTIES AND AREA OF USE: Decorative metal effects. For exclusive indoor use: not weatherproof. Once dried, the surface remains delicate and subject to fingerprinting or rubbing removal. No overpainting with transparent paints (blackening). The metal layer gives the objects a pleasant aesthetic appearance. It can decorate frames, ornaments, cups, Christmas objects. The 400 ml aerosol can covers an area of 1,5 - 2 m² depending on the color of the surface, the thickness of each layer and number of layers applied.
USE: Use between +10' C and +25' C, max. air humidity 60%. The surface to be painted must have the same temperatures, to avoid adhesion and finishing problems. The can must be at room temperature. For an optimal effect spray from 20-25 cm away. During use, use appropriate personal protective equipment (gloves, goggles and masks). Clean the surface from grease and dust. Remove any rust from metals. In case of use on plastic use previously the plastic primer. For higher adherence to aluminum, use the metal adhesion promoter beforehand. Use the primer-filler base beforehand to level the surfaces. Mask the parts not to be treated. Shake vigorously the can for 2 minutes. Make a spray test on a separate surface. Apply in thin layers with several crossed coats, with an interval of 3-5 minutes between one and the other. Do not apply on synthetic paints. Store in a dry place. Protect from direct sunlight and other heat sources. Use only during the dry season, in places protected from the wind, and in well-ventilated environments. Follow the warning texts on the labels. Attention: Product particularly sensitive to high temperatures. The quality integrity of the product is guaranteed for 2 years if stored under the following conditions: storage temperature 20° C
Tinplate spraycan 15 bars
Net content 400 ml
Appearance Spray can with liquid under pressure
Color Different colors
Odour solvent
Density at 20°C 0,75 ÷ 0,80 g/ml
Pressure at 20°C 4,0 ± 0,5 bar
Pressure at 50°C 8,0 ± 0,5 bar
Flash point < 0° C
Viscosity Ford Cap 4 11’’
Dry residues in the can from 21% to 24,6%
Particle size by grinder from 8 to 10 Micron
Thickness 1 layer 7-10 Micron
Thickness 3 layers 22-30 Micron
Heat resistance 110°C
Patented safety cap "child-proof" with reference to the color in the can